Restart The Measurement - Agilent Technologies ESA Series User's/Programmer's Reference

Remote Command Reference
INITiate Subsystem
long period of time, measurement accuracy may degrade.
Front Panel
Access:
Meas Control, Pause

Restart the Measurement

:INITiate:RESTart
This command applies to measurements found in the
command to restart the present measurement from the "idle" state, regardless of its
operating state. It is equivalent to :INITiate[:IMMediate] for single
measurement mode, or :ABORt for continuous measurement mode.
Front Panel
Access:
Restart
Meas Control, Restart
Resume the Measurement
:INITiate:RESume
This command applies to measurements found in the
command to resume the current measurement by changing the current
measurement state from the "paused" state back to the "wait for trigger" state.
Front Panel
Access: Meas Control, Resume
290
menu. Use this
MEASURE
MEASURE menu. Use this
Chapter 5