Delta Pair Markers Start Frequency X Value - Agilent Technologies ESA Series User's/Programmer's Reference

Remote Command Reference
CALCulate:MARKer Subsection
:CALCulate:MARKer[1]|2|3|4:X:SPAN?
Change the frequency span of the designated span-type marker pair to position the
markers at the desired trace X values. The value is in the X-axis units (which is
usually frequency or time). Use :CALCulate:MARKer:MODE SPAN to select
span markers.
The query returns the current X value frequency span of the designated markers. If
span markers are not selected, the query returns the latest marker reading as a span
(always positive).
Default Unit: Matches the units of the trace on which the markers are
positioned.
Front Panel
Access:
Marker, <active marker>, Span Pair

Delta Pair Markers Start Frequency X Value

:CALCulate:MARKer[1]|2|3|4:X:STARt <param>
:CALCulate:MARKer[1]|2|3|4:X:STARt?
Position the start (reference) frequency of the designated band-type marker pair, at
the specified trace X value. The value is in the X-axis units (which is often
frequency or time). Use : CALCulate:MARKer:MODE BAND to select band
markers.
The query returns the current X value start/reference frequency of the designated
marker.
Default Unit: Matches the units of the trace on which the markers are
positioned
Front Panel
Access:
Marker, <active marker>, Delta Pair
Delta Pair Markers Stop Frequency X Value
:CALCulate:MARKer[1]|2|3|4:X:STOP <param>
:CALCulate:MARKer[1]|2|3|4:X:STOP?
Position the stop frequency of the designated band-type marker pair, at the
specified trace X value. The value is in the X-axis units (which is often frequency
or time). Use : CALCulate:MARKer:MODE BAND to select band markers.
The query returns the current X value stop frequency of the designated marker.
Default Unit: Matches the units of the trace on which the markers are
positioned
262 Chapter 5