Questionable Negative Transition - Agilent Technologies ESA Series User's/Programmer's Reference

Remote Command Reference
STATus:QUEStionable Subsection
Uncalibrated Event register when that bit has a positive transition (0 to 1). The
variable <integer> is the sum of the decimal values of the bits that you want to
enable.
Factory Preset
and *RST:
Range:

Questionable Negative Transition

:STATus:QUEStionable:NTRansition <integer>
:STATus:QUEStionable:NTRansition?
This command determines which bits in the Questionable Condition register will
set the corresponding bit in the Questionable Event register when that bit has a
negative transition (1 to 0). The variable <integer> is the sum of the decimal values
of the bits that you want to enable.
Factory Preset
and *RST:
Range:
Questionable Power Condition
:STATus:QUEStionable:POWer:CONDition?
This query returns the decimal value of the sum of the bits in the Questionable
Power Condition register.
The data in this register is continuously updated and reflects the current conditions.
NOTE
Questionable Power Enable
:STATus:QUEStionable:POWer:ENABle <integer>
:STATus:QUEStionable:POWer:ENABle?>
This command determines which bits in the Questionable Power Condition
Register will set bits in the Questionable Power Event register, which also sets the
Power Summary bit (bit 3) in the Questionable Register. The variable <integer> is
the sum of the decimal values of the bits you want to enable.
Factory Preset
and *RST:
Range:
360
32767 (all 1's)
integer, 0 to 32767
0
integer, 0 to 32767
32767 (all 1's)
integer, 0 to 32767
Chapter 5