Mode - Agilent Technologies ESA Series User's/Programmer's Reference

MODE

Selects the measurement mode of your analyzer.
mode is the default mode and is for general purpose measurement use.
Additional measurement modes can be added to your instrument
memory. Example modes include Phase Noise (requires Option 226),
Noise Figure (requires Option 219), GSM (requires Option BAH) and
cdmaOne (requires Option BAC).
Other modes, besides Spectrum Analysis, must be installed/licensed in
your instrument before they will appear in the
individual measurement personality mode manuals for instructions on
how to install the software. Some modes also require the presence of
specific hardware.
Selects the spectrum analysis measurement mode for your analyzer.
Spectrum
Analysis
Mode Setup Enables you to change measurement settings common to all
measurements in the
(Spectrum
Analysis Mode) there are several built-in power measurements. Parameters that you
set in the Mode Setup menu affect all of these measurements, see
Volume 2, One-Button Power Measurements User's and Programmer's
Reference for more information.
Chapter 2
menu. In Spectrum Analysis mode,
MEASURE
Front-Panel Key Reference
MODE
Spectrum Analysis
menu. Refer to the
Mode
115