Questionable Power Event Query - Agilent Technologies ESA Series User's/Programmer's Reference

Questionable Power Event Query

:STATus:QUEStionable:POWer[:EVENt]?
This query returns the decimal value of the sum of the bits in the Questionable
Power Event register.
The register requires that the equivalent PTR or NTR filters be set before a
NOTE
condition register bit can set a bit in the event register.
The data in this register is latched until it is queried. Once queried, the data is
cleared.
Questionable Power Negative Transition
:STATus:QUEStionable:POWer:NTRansition <integer>
:STATus:QUEStionable:POWer:NTRansition?
This command determines which bits in the Questionable Power Condition register
will set the corresponding bit in the Questionable Power Event register when that
bit has a negative transition (1 to 0). The variable <integer> is the sum of the
decimal values of the bits that you want to enable.
Factory Preset
and *RST:
Range:
Questionable Power Positive Transition
:STATus:QUEStionable:POWer:PTRansition <integer>
:STATus:QUEStionable:POWer:PTRansition?
This command determines which bits in the Questionable Power Condition register
will set the corresponding bit in the Questionable Power Event register when that
bit has a positive transition (0 to 1). The variable <integer> is the sum of the
decimal values of the bits that you want to enable.
Factory Preset
and *RST:
Range:
Chapter 5
0
integer, 0 to 32767
32767 (all 1's)
integer, 0 to 32767
Remote Command Reference
STATus:QUEStionable Subsection
361