Display - Agilent Technologies ESA Series User's/Programmer's Reference

Display

Accesses menu keys that allow you to control what is displayed on the
analyzer, including titles, the display line
well as the testing of trace data against user entered limits.
Allows the measurement window to expand horizontally over the entire
Full Screen
instrument display. Pressing a key that brings up a new menu will
cancel the full screen function.
Key Access:
Activates an adjustable horizontal line that is used as a visual reference
Display Line
line. The line, which can be used for trace arithmetic, has amplitude
On Off
values that correspond to its vertical position when compared to the
reference level. The value of the display line appears in the active
function block and on the left side of the display. The display line can be
adjusted using the step keys, knob, or numeric keypad. Pressing any
digit, 0 through 9, on the numeric keypad brings up the selected
terminator menu. To deactivate the display line, press
Key Access:
Accesses menu keys that allow you to create and define the parameters
Limits
of limit lines.
Key Access:
Limit 1
Limit 2
Chapter 2
Display
Display
Display
Allows you to select either of the two available limits.
The and
Limit 1 Limit 2
you to set parameters for the selected limit.
Key Access:
Display
Type
Allows you to define the limit you are
Upper Lower
editing as either an upper or lower
limit. An upper limit fails if trace 1
exceeds the limit. A lower limit fails if
trace 1 falls below the limit.
Key Access:
Limit 2
Turns the limit line display on and off.
Limit On Off
Either
must be turned on for a limit test to
work.
Key Access:
Limit 2
Front-Panel Key Reference
graticule and annotation, as
,
Display Line (Off)
keys access menu keys that allow
,
Limits
,
Display Limits
or , as well as
Limit Margin
,
Display Limits
Display
.
, or
Limit 1
,
Test
, or
Limit 1
73