Questionable Integrity Uncalibrated Event Query - Agilent Technologies ESA Series User's/Programmer's Reference

Questionable Integrity Register. The variable <integer> is the sum of the decimal
values of the bits you want to enable.
Factory Preset
and *RST:
Range:

Questionable Integrity Uncalibrated Event Query

:STATus:QUEStionable:INTegrity:UNCalibrated[:EVENt]?
This query returns the decimal value of the sum of the bits in the Questionable
Integrity Uncalibrated Event register.
The register requires that the equivalent PTR or NTR filters be set before a
NOTE
condition register bit can set a bit in the event register.
The data in this register is latched until it is queried. Once queried, the data is
cleared.
Questionable Integrity Uncalibrated Negative Transition
:STATus:QUEStionable:INTegrity:UNCalibrated:NTRansition
<integer>
:STATus:QUEStionable:INTegrity:UNCalibrated:NTRansition?
This command determines which bits in the Questionable Integrity Uncalibrated
Condition register will set the corresponding bit in the Questionable Integrity
Uncalibrated Event register when that bit has a negative transition (1 to 0). The
variable <integer> is the sum of the decimal values of the bits that you want to
enable.
Factory Preset
and *RST:
Range:
Questionable Integrity Uncalibrated Positive Transition
:STATus:QUEStionable:INTegrity:UNCalibrated:PTRansition
<integer>
:STATus:QUEStionable:INTegrity:UNCalibrated:PTRansition?
This command determines which bits in the Questionable Integrity Uncalibrated
Condition register will set the corresponding bit in the Questionable Integrity
Chapter 5
32767 (all 1's)
Integer, 0 to 32767
0
integer, 0 to 32767
Remote Command Reference
STATus:QUEStionable Subsection
359