Make A Directory - Agilent Technologies ESA Series User's/Programmer's Reference

Remote Command Reference
MMEMory Subsystem
:MMEMory:STORe:STATe
If the revision of the state being loaded is newer than the
revision of the instrument, no state is recalled and an error is
reported.
If the revision of the state being loaded is equal to the revision of
the instrument, all regions of the state will be loaded.
If the revision of the state being loaded is older than the revision
of the instrument, the instrument will only load the older regions
of the state.

Make a Directory

:MMEMory:MDIRectory <dir_path>
where "path" is "A:\" or "C:\"
Makes a directory or subdirectory in the specified path.
Example:
Make a directory in C: \, which is in instrument memory:
:MMEMory:MDIRectory "C:\"
Front Panel
Access: File, Create Dir
Delete a Directory
:MMEMory:RDIRectory <dir_name>
Deletes the specified directory and all files and subdirectories within that directory.
Front Panel
Access: File, Delete
Store a Corrections Table to a File
:MMEMory:STORe:CORRection
ANTenna|CABLe|OTHer|USER,<file_name>
Stores the specified correction set to the file named <file_name>.
Example:
:MMEM:STOR:CORR ANT, "A:TEST1.ANT"
Remarks: This command will fail if the <file_name> already exists.
Front Panel
Access: File, Save, Type, Corrections
300 Chapter 5