Sense]:Frequency Subsection - Agilent Technologies ESA Series User's/Programmer's Reference

[:SENSe]:FREQuency Subsection

Center Frequency
[:SENSe]:FREQuency:CENTer <freq>
[:SENSe]:FREQuency:CENTer UP|DOWN
[:SENSe]:FREQuency:CENTer?
Set the center frequency.
NOTE In log sweep mode, the minimum start frequency is 10 Hz.
Factory Preset
and *RST:
Range:
Default Unit:
Front Panel
Access:
Center Frequency Step Size Automatic
[:SENSe]:FREQuency:CENTer:STEP:AUTO OFF|ON|0|1
[:SENSe]:FREQuency:CENTer:STEP:AUTO?
Specifies whether the step size is set automatically based on the span.
Factory Preset
and *RST:
Chapter 5
ESA E4401B, E4411B: 750 MHz
ESA E4402B, E4403B: 1.5 GHz
ESA E4404B: 3.35 GHz
ESA E4405B: 6.6 GHz
ESA E4407B, E4408B: 13.25 GHz
ESA E4401B, E4411B: –80 MHz
ESA E4402B, E4403B: –80 MHz
ESA E4404B: –80 MHz
ESA E4405B: –80 MHz
ESA E4407B, E4408B: –80 MHz
Hz
FREQUENCY/Channel, Center Freq
On
1. 10 Hz minimum in log sweep mode.
Remote Command Reference
[:SENSe]:FREQuency Subsection
1
to 1.58 GHz
1
to 3.10 GHz
1
to 6.78 GHz
1
to 13.3 GHz
1
to 27.0 GHz
323