Set External Mixer Lo Harmonic Mode - Agilent Technologies ESA Series User's/Programmer's Reference

Remote Command Reference
[SENSe]:MIXer Subsection

Set External Mixer LO Harmonic Mode

[:SENSe]:MIXer:HARMonic:AUTO OFF|ON|0|1
[:SENSe]:MIXer:HARMonic:AUTO?
This command allows you to set the external mixer LO harmonic mode to either
automatic or manual. The manual mode is used with mixers other than the
HP/Agilent 11970-Series or 11974-Series Mixers to manually choose the required
LO harmonic. This command is available only with Option AYZ (External
Mixing).
Refer also to commands :INPut:MIXer INTernal|EXTernal and
:INPut:MIXer:TYPE PRESelected|UNPReselect .
Factory Preset
and *RST:
Remarks:
Manually selecting a harmonic will remove any restrictions on Mixer Bias and
NOTE
Mixer Type, and External Mixer Band will become USER. Returning the
Harmonic to AUTO will reset the band to A, set Mixer Type to UNPReselect, and
turn Mixer Bias Off.
Front Panel
Access:
330
AUTO
The harmonic value with its associated sign is automatically
determined from the external mixer band selected. This is the
AUTO mode. For mixers other than the HP/Agilent
11970-Series or 11974-Series, an LO harmonic other than that
determined in the AUTO mode may be required. This is
achieved using this command and related command
[:SENSe]:MIXer:HARMonic <value> .
Input/Output (or Input), Input Mixer, Mixer Config, Harmonic
Auto Man
Chapter 5