Set Center Frequency To The Marker Value - Agilent Technologies ESA Series User's/Programmer's Reference

Remote Command Reference
CALCulate:MARKer Subsection
Factory Preset
and *RST: Off
Front Panel
Access:
Peak Search (or Search), Pk-Pk Search

Set Center Frequency to the Marker Value

:CALCulate:MARKer[1]|2|3|4[:SET]:CENTer
Sets the center frequency equal to the specified marker frequency, which moves the
marker to the center of the screen. In delta marker mode, the center frequency is set
to the marker delta value. This command is not available in zero span.
Front Panel
Access:
Marker –>, Mkr –> CF
Set Reference Level to the Marker Value
:CALCulate:MARKer[1]|2|3|4[:SET]:RLEVel
Sets the reference level to the specified marker amplitude. In delta marker mode,
the reference level is set to the amplitude difference between the markers.
Front Panel
Access: Marker –>, Mkr –> Ref Lvl
Peak Search (or Search), Meas Tools, Mkr –> Ref Lvl
Set Span to the Marker Value
:CALCulate:MARKer[1]|2|3|4[:SET]:SPAN
Sets the span to the value of the specified marker frequency. The specified marker
must be in delta mode. Select the delta marker mode with
CALCulate:MARKer[1]|2|3|4:MODE DELTa . This command is not available
in zero span.
Front Panel
Marker, Delta, Marker –>, Mkr ∆ –> Span
Access:
Set Start Frequency to the Marker Value
:CALCulate:MARKer[1]|2|3|4[:SET]:STARt
Sets the start frequency to the value of the specified marker frequency. In delta
marker mode, the start frequency is set to the marker delta value. This command is
256 Chapter 5