Agilent Technologies ESA Series User's/Programmer's Reference page 168

Front-Panel Key Reference
Trace/View
If the detector is Auto Coupled when you select
NOTE
may change, dependent on the other active trace functions. Manually
select a detector if a specific detector is required before selecting
Hold
page
Changing the vertical scale (
NOTE
Restart
window in Zone Span (
Holds and displays the amplitude data of the selected trace. The trace
View
register is not updated as the analyzer sweeps. If a trace is deactivated
by pressing
View
Key Access:
Stores the amplitude data for the selected trace, and removes it from
Blank
the display. The selected trace register will not be updated as the
analyzer sweeps. This function is activated for traces 2 and 3 at
power-on and by pressing
Key Access:
Accesses the following
Operations
Key Access:
1 ↔ 2
2 − DL → 2
2 ↔ 3
1 → 3
2 → 3
168
. Refer to Figure 2-1, "Detector (Auto) Selection Flowchart,"
57.
, turning averaging on (
Span
the stored trace data can be retrieved by pressing
Blank,
.
Trace/View
Preset
Trace/View
Operations
,
Trace/View More
Exchanges the contents of the trace 1 register with the
trace 2 register and puts trace 1 and 2 in view mode.
Key Access:
Subtracts the display line from trace 2 and places the
result in trace 2 and puts trace 2 in view mode. The
2 − DL → 2
Key Access:
Exchanges the contents of trace 2 with trace 3 and puts
trace 2 and 3 in view mode.
Key Access:
Copies trace 1 into trace 3 and puts trace 3 in view
mode.
Key Access:
Copies trace 2 into trace 3 and puts trace 3 in view
mode.
Key Access:
Min Hold
,
Amplitude Scale Type
,
BW/Avg Average (On)
, ) restarts the held trace.
Zone
(when
Preset Type
menu keys:
, ,
Trace/View More Operations
function is a math operation.
, ,
Trace/View More Operations
, ,
Trace/View More Operations
, ,
Trace/View More Operations
, ,
Trace/View More Operations
, the detector
Min
on
, Log or Lin), pressing
), or switching
is set to .)
Factory
Chapter 2