Agilent Technologies ESA Series User's/Programmer's Reference page 157

Save User
Preset
Accesses the following
Time/Date
real-time clock:
Key Access:
Time/Date
On Off
Date Format
MDY DMY
Set Time
Set Date
Accesses the following
Alignments
circuitry of the analyzer, load default values for the alignment system,
and adjust the 10 MHz reference.
Key Access:
Auto Align
Chapter 2
Key Access:
System
Saves the active state of the analyzer into the User
Preset register for recall on
selected. Refer to "Preset"
information.
Key Access:
System
menu keys used to set and display the
Time/Date
System
Turns the display of the real-time clock on or off.
Key Access:
System
Changes the display of the date from a month-day-year
format to a day-month-year format.
Key Access:
System
Allows you to set the time of the real-time clock. Enter
the time in 24 hour HHMMSS format, using the
numeric keypad and pressing
values are from 00 to 23. Valid minute (MM) and second
(SS) values are from 00 to 59.
Key Access:
System
Allows you to set the date of the real-time clock. Enter
the date in the YYYYMMDD format using the numeric
keypad and press
Enter
0000 through 9999. Valid month (MM) values are from
01 to 12, and valid day values are from 01 to 31.
Key Access:
System
menu keys which align the internal
Alignments
System
Accesses the
Auto Align
Turns on the automatic alignment of all
All
measurement systems. When
Align
the left edge of the display.
Key Access:
Front-Panel Key Reference
, ,
Power On/Preset Preset Type
if
Preset Preset (User)
in this chapter for more
,
Power On/Preset
,
Time/Date
,
Time/Date
. Valid hour (HH)
Enter
,
Time/Date
. Valid year (YYYY) values are
,
Time/Date
menu keys.
, is selected, " " appears along
All AA
,
System Alignments
System (Local)
is
Auto
157