Hcopy; Hcopy Subsystem - Agilent Technologies ESA Series User's/Programmer's Reference

HCOPy Subsystem

The HCOPy subsystem controls the setup of plotting and printing to an external
device.
Abort the Print
:HCOPy:ABORt
Aborts hard copy printout of results.
Front Panel
Access: ESC (with print in progress)
Printer Type
:HCOPy:DEVice:TYPE AUTO|CUSTom|NONE
:HCOPy:DEVice:TYPE?
Sets up the printer by selecting printer type.
AUTO - the instrument queries the printer to determine the printer type and
automatically sets itself for that printer
CUSTom - allows you to select a custom printer if your printer cannot be
auto-configured
NONE - tells the instrument that the hard copy output device is not a printer
Factory Preset
and *RST: The factory default is AUTO. This parameter is persistent,
which means that it retains the setting previously selected, even
through a power cycle.
Front Panel
Access:
Print Setup, Printer Type
Color Hard Copy
:HCOPy:IMAGe:COLor[:STATe] OFF|ON|0|1
:HCOPy:IMAGe:COLor[:STATe]?
Selects between color and monochrome mode for hard copy output.
Factory Preset
and *RST: The factory default is On. This parameter is persistent, which
means that it retains the setting previously selected, even
through a power cycle.
Chapter 5
Remote Command Reference
HCOPy Subsystem
285