Marker - Agilent Technologies ESA Series User's/Programmer's Reference

Front-Panel Key Reference
Marker →
Marker →
Accesses the following marker function menu keys:
Mkr → CF
Sets the center frequency of the analyzer to the marker frequency. In
Delta mode,
value.
When the frequency scale is in log mode, the center frequency is not at
NOTE
the center of the display.
Key Access:
Mkr → CF Step
Changes the center-frequency step size to match the value of the active
marker. Press
marker delta is active, the step size will be set to the frequency
difference between the markers. This function can be used to step from
one signal harmonic to another.
span.
Key Access:
Mkr → Start
Changes the start frequency so that it is equal to the frequency of the
active marker. In Delta mode,
marker delta value.
Key Access:
Mkr → Stop
Changes the stop frequency so that it is equal to the frequency of the
active marker. In Delta mode,
marker delta value.
Key Access:
Mkr ∆ → Span
Sets the start and stop frequencies to the values of the delta markers.
The marker is then set to normal at the center frequency.
is not available if the marker is off, or in zero span.
Key Access:
The above menu keys are not available when
NOTE
selected.
Mkr → Ref Lvl
Changes the reference level to the active marker value, moving the
marked point to the reference level (top line of the graticule). In Delta
mode,
between the markers. (For example, if the difference is –15 dB, the
reference level will be set to –15 dBm.)
Key Access:
112
Mkr → CF
sets the center frequency to the marker delta
Mkr → CF
is not available in zero span.
Marker →
then
Frequency
Marker →
Mkr → Start
Marker →
Mkr → Stop
Marker →
Marker →
Mkr → Ref Lvl
sets the reference level to the amplitude difference
Marker →
to view the step size. If
CF Step Auto Man
Mkr → CF Step
is not available in zero
Mkr → Start
sets the start frequency to the
is not available in zero span.
Mkr → Stop
sets the stop frequency to the
is not available in zero span.
Segmented (On)
Mkr ∆ → Span
is
Chapter 2