Agilent Technologies ESA Series User's/Programmer's Reference page 232

Remote Command Reference
The first few pages of this chapter contain common commands specified in IEEE
Standard 488.2-1992, IEEE Standard Codes, Formats, Protocols and Common
Commands for Use with ANSI/IEEE Std 488.1-1987. New York, NY, 1992.
Following these commands, the Agilent ESA spectrum analyzers SCPI commands
are listed.
NOTE Chapter 3, "Programming Fundamentals," on page 179 and Chapter 4 , "Status
Registers," on page 197 supplement the information presented in this chapter.
Refer to Chapter 2 , "Front-Panel Key Reference," on page 39 in this guide for
additional information about the operation of each analyzer function. Use the
analyzer HELP key to obtain similar information about analyzer key functions.
Refer to the "Agilent 8590/ESA Spectrum Analyzers Programming Conversion
Guide" for specific backwards compatibility information between commands for
HP/Agilent 8590-Series spectrum analyzers and Agilent ESA spectrum analyzers.
If you are using an optional programming compatibility modes (for example
Option 266), you must refer to the manual that came with the option for command
information.
232 Chapter 5