Printed Page Size - Agilent Technologies ESA Series User's/Programmer's Reference

Sets the number of display print outputs sent to print on one piece of paper, before
a form feed is sent.
Factory Preset
and *RST: The factory default is 1. This parameter is persistent, which
means that it retains the setting previously selected, even
through a power cycle.
Range: Integer, 1 or 2
Front Panel
Access:
Print Setup, Prints/Page 1 2

Printed Page Size

:HCOPy:PAGE:SIZE A|B|A3|A4|LETTer|LEGal|EXECutive|LEDGer
:HCOPy:PAGE:SIZE?
Formats the print image for the selected page size. Page size "A" is letter, and page
size "B" is ledger. There is no size standardization for "legal" or "executive."
Factory Preset
and *RST: The factory default is letter. This parameter is persistent, which
means that it retains the setting previously selected, even
through a power cycle.
Front Panel
Access: Print Setup, /Page Size
Chapter 5
Remote Command Reference
HCOPy Subsystem
287