Delta Pair Markers Stop Frequency X Position - Agilent Technologies ESA Series User's/Programmer's Reference

Range: Refer to the [: SENSe]:SWEep:POINts command.
Front Panel
Access:
Marker, <active marker>, Delta Pair

Delta Pair Markers Stop Frequency X Position

:CALCulate:MARKer[1]|2|3|4:X:POSition:STOP <param>
:CALCulate:MARKer[1]|2|3|4:X:POSition:STOP?
Position the right-most marker, the stop frequency of the designated band-type
marker pair, at the specified trace X position. Use : CALCulate:MARKer:MODE
BAND to select band markers.
The query returns the current X position stop frequency of the designated marker.
Range: Refer to the [: SENSe]:SWEep:POINts command.
Front Panel
Access:
Marker, <active marker>, Delta
Marker X-Axis Readout
:CALCulate:MARKer[1]|2|3|4:X:READout
FREQuency|TIME|ITIMe|PERiod
:CALCulate:MARKer[1]|2|3|4:X:READout?
Selects the units for the x-axis readout of the marker. Available units are:
Frequency
Time
Inverse of time
Period
Factory Preset
and *RST: Frequency
Front Panel
Access:
Marker, Readout, Frequency
Marker, Readout, Time
Marker, Readout, Inverse Time
Marker, Readout, Period
Span Markers Span X Value
:CALCulate:MARKer[1]|2|3|4:X:SPAN <param>
Chapter 5
Remote Command Reference
CALCulate:MARKer Subsection
261