Sense]:Demod Subsection - Agilent Technologies ESA Series User's/Programmer's Reference

Remote Command Reference

[:SENSe]:DEMod Subsection

[:SENSe]:DEMod Subsection
Type of Demodulation
[:SENSe]:DEMod AM|FM
[:SENSe]:DEMod?
Sets the type of demodulation. FM is only available with Option BAA, AYQ or
106. If you have multiple FM demodulation hardware options, the hardware that
will be used is automatically selected in order of priority (with firmware revision
A.14.00 or later).
1. Option 106 - Bluetooth 
2. Option AYQ - Quasi-peak detection and FM demodulation
3. Option BAA - FM Demodulation
Factory Preset
and *RST: AM
Front Panel
Access: Det/Demod, Demod, AM
Det/Demod, Demod, FM
FM Deviation
[:SENSe]:DEMod:FMDeviation <freq>
[:SENSe]:DEMod:FMDeviation?
Sets the total FM frequency deviation for displaying the demodulation. FM
Deviation can only be changed if you have Options BAA or AYQ installed. For
Option 106, only the query form of the command is applicable.
If you have multiple FM demodulation hardware options, the hardware that will be
used is automatically selected in order of priority (with firmware revision A.14.00
or later).
1. Option 106 - Bluetooth 
2. Option AYQ - Quasi-peak detection and FM demodulation
3. Option BAA - FM Demodulation
Factory Preset
and *RST: 100 kHz for Option BAA, AYQ
Approximately 40 kHz for Option 106 (determined during FM
demodulation alignment)
1. Bluetooth is a trademark owned by its proprietor and used by Agilent Technologies under
license.
316
1
Chapter 5