Agilent Technologies ESA Series User's/Programmer's Reference page 160

Front-Panel Key Reference
System (Local)
Load Defaults
With Option A4H (GPIB and Parallel) only. Allows the GPIB address to
Remote Port
be entered. The default address is 18.
With Option 1AX (RS-232 and Parallel) only. Allows the baud rate to be
set. The available baud rate values are as follows: 110, 300, 600, 1200,
2400, 4800, 9600, 19200, 38400, 57600, 115200. The default baud rate is
9600.
Key Access:
Displays the number and description of the options installed in your
Show System
analyzer. It also displays the instrument model number, product
number, serial number, software revision number, Host ID (for
licensing), bootrom revision, and amount of RAM and ROM.
Key Access:
Prev Page
Next Page
Gives detailed information about the hardware installed on your
Show Hdwr
analyzer.
Key Access:
Prev Page
Next Page
160
Key Access:
System
Loads the default values for the alignment system,
turns on the frequency corrections, and resets the time
base to the factory values.
automatically execute three times after pressing
.
Defaults
Key Access:
System
System
,
System More
Allows you to access the previous page of show system.
It is grayed out if you are on the first page or only one
page exists.
Key Access:
System
Allows you to access the next page of show system. It is
grayed out if you are on the last page or only one page
exists.
Key Access:
System
,
System More
Allows you to access the previous page of show
hardware. It is grayed out if you are on the first page or
only one page exists.
Key Access:
System
Allows you to access the next page of show hardware. It
is grayed out if you are on the last page or only one page
exists.
Key Access:
System
,
Alignments
, will
Align Now, All
,
Alignments
, ,
More Show System
, ,
More Show System
, ,
More Show Hdwr
, ,
More Show Hdwr
Load
Chapter 2