Span Markers Center Frequency X Position - Agilent Technologies ESA Series User's/Programmer's Reference

Remote Command Reference
CALCulate:MARKer Subsection
Front Panel
Access: Marker

Span Markers Center Frequency X Position

:CALCulate:MARKer[1]|2|3|4:X:POSition:CENTer <param>
:CALCulate:MARKer[1]|2|3|4:X:POSition:CENTer?
Position the center frequency, of the designated span-type marker pair, at the
specified trace X position. Use : CALCulate:MARKer:MODE SPAN to select
span markers.
The query returns the current X position center frequency of the designated
markers.
Range: Refer to the [: SENSe]:SWEep:POINts command.
Front Panel
Access:
Marker, <active marker>, Span Pair
Span Markers Span X Position
:CALCulate:MARKer[1]|2|3|4:X:POSition:SPAN <param>
:CALCulate:MARKer[1]|2|3|4:X:POSition:SPAN?
Change the frequency span, of the designated span-type marker pair, to position
the markers at the desired trace X positions. Use : CALCulate:MARKer:MODE
SPAN to select span markers.
The query returns the current X position frequency span of the designated markers.
Range: Refer to the [: SENSe]:SWEep:POINts command.
Front Panel
Access:
Marker, <active marker>, Span Pair
Delta Pair Markers Start Frequency X Position
:CALCulate:MARKer[1]|2|3|4:X:POSition:STARt <param>
:CALCulate:MARKer[1]|2|3|4:X:POSition:STARt?
Position the left-most marker, the start (reference) frequency of the designated
band-type marker pair, at the specified trace X position. Use
: CALCulate:MARKer:MODE BAND to select band markers.
The query returns the current X position start/reference frequency of the
designated marker.
260 Chapter 5