Mmemory:store:trace <Label>,<File_Name - Agilent Technologies ESA Series User's/Programmer's Reference

Remote Command Reference
MMEMory Subsystem
Example:
:MMEM:STOR:STAT 1,"C:mystate.sta"
Remarks: You must be in Spectrum Analysis mode to use this command.
The *SAV commands stores all of the mode states.
This command will fail if the <file_name> already exists.
Store a Trace in a File
:MMEMory:STORe:TRACe <label>,<file_name>
Saves the specified trace to a file in memory. The file name must have a file
extension of :csv or :trc. The file extension determines whether just the trace data
is stored, or the trace is stored with its state. The .csv extension uses the CSV
(comma-separated values) format for the trace data in frequency/amplitude pairs.
The .trc extension is for files that include both trace and state data. The .trc file
data is only readable by the analyzer.
Example:
:MMEM:STOR:TRAC TRACE3,"C:mytrace.trc"
Range: Trace labels are: TRACE1|TRACE2|TRACE3|ALL
Remarks: This command will fail if the <file_name> already exists.
Front Panel Access:
File, Save, Type, Trace
302 Chapter 5