Normalized Reference Level Position - Agilent Technologies ESA Series User's/Programmer's Reference

Remote Command Reference
DISPlay Subsystem

Normalized Reference Level Position

:DISPlay:WINDow:TRACe:Y[:SCALe]:NRPosition <integer>
:DISPlay:WINDow:TRACe:Y[:SCALe]:NRPosition?
Selects the position of the normalized reference level. The top and bottom graticule
lines correspond to 10 and 0, respectively.
NOTE See command :CALCulate:NTData[STATe] OFF|ON|0|1
Factory Preset
and *RST:
Range:
Front Panel
Access:
Trace Y-Axis Amplitude Scaling
:DISPlay:WINDow:TRACe:Y[:SCALe]:PDIVision <rel_ampl>
:DISPlay:WINDow:TRACe:Y[:SCALe]:PDIVision?
Sets the per-division display scaling for the y-axis when y-axis units are set to
amplitude units.
Factory Preset
and *RST:
Range:
Default Unit:
Front Panel
Access:
Trace Y-Axis Frequency Scaling
:DISPlay:WINDow:TRACe:Y[:SCALe]:PDIVision:FREQuency <freq>
:DISPlay:WINDow:TRACe:Y[:SCALe]:PDIVision:FREQuency?
This command sets the per-division display scaling for the y-axis, when the y-axis
units are set to frequency units, such as when looking at FM deviation with the
command [:SENSe]:DEMod:VIEW[:STATe] OFF|ON|0|1 .
For Option 106 (Bluetooth FM Demodulation) only the query form of this
NOTE
command is available; the value is determined during alignment.
278
10
integer
View/Trace, Normalize, Norm Ref Posn
10 dB
0.1 to 20.0 dB
dB
AMPLITUDE/Y Scale, Scale/Div
Chapter 5