Measure (Spectrum Analysis Mode) - Agilent Technologies ESA Series User's/Programmer's Reference

MEASURE (Spectrum Analysis Mode)

In the Spectrum Analysis mode (see the
menu that lets you make transmitter power measurements such as
adjacent channel power, occupied bandwidth, and harmonic distortion
measurements, refer to Volume 2, One-Button Power Measurements
User's and Programmer's Reference for more information about these
measurements. If other modes are available and have been selected, the
measurements for that particular mode will be displayed. Some
common settings can be made for these measurements using the
function under the
several radio standards available by pressing
The measurements described in Volume 2, One-Button Power
NOTE
Measurements User's and Programmer's Reference are available in SA
mode (see
if an optional personality is installed, use the appropriate user's guide
for information about those modes.
Meas Setup Displays the setup menu for the currently selected measurement. The
Meas Setup
Measurement. This menu is empty if no measurement is active. No
measurement is active if
Chapter 2
key. For example, you may select one of
Mode Setup
key). Other measurements are available in other modes
Mode
menu choices depend on the currently selected Mode and
Meas Off
Front-Panel Key Reference
MEASURE (Spectrum Analysis Mode)
key), this key displays a
Mode
Mode Setup
is selected in the
Measure
, .
Radio Std
menu.
113