Scpi Sections And Subsections - Agilent Technologies ESA Series User's/Programmer's Reference

SCPI Sections and Subsections

SCPI commands related to major functional areas (such as calculate or) are
grouped into blocks, or subsystems. Some of these subsystems are further divided
into subsections (such as calculate/marker, or sense/harmonics). An instrument
model is then created to represent the way in which instrument functionality is
viewed and categorized by SCPI. Refer to IEEE SCPI-1997 Volume 2: Command
Reference, Standard Commands for Programmable Instruments, Version 1997.0,
May, 1997 for a more complete description of the SCPI instrument model.
The SCPI subsystems in this chapter are listed in alphabetical order. Likewise, the
SCPI commands are in alphabetical order within the subsystem in which they
belong. Refer to the following table to locate SCPI command subsystems and
subsections by page number.
SCPI Subsystem/Subsection
IEEE Common Commands
:ABORt
:CALCulate
:CALCulate:LLINe
:CALCulate:MARKer
:CALCulate:NTData
:CALibration
:CONFigure
:COUPle
:DISPlay
:FORMat
:HCOPy
:INITiate
:INPut
:INSTrument
:MMEMory
:OUTPut
[:SENSe]:
[:SENSe]:AVERage
Chapter 5
Remote Command Reference
SCPI Sections and Subsections
Page
page 235
page 240
page 241
page 243
page 250
page 264
page 265
page 270
page 271
page 273
page 282
page 285
page 288
page 291
page 294
page 297
page 303
page 304
page 305
233