Agilent Technologies ESA Series User's/Programmer's Reference page 75

Chapter 2
Front-Panel Key Reference
Point
Allows you to create or edit a limit
point. Up to 200 points may be defined
for each limit line. Enter the point
number to be created or edited using
the numeric keypad, then Press
or use the knob, Tab or step keys to
move to an existing point. After
selecting a point,
Frequency
becomes active.
Key Access: ,
Display Limits
,
Limit 2 Edit
(The key label is
Frequency
has been selected.)
X Axis Units (Time)
Allows you to enter the frequency
value for a limit point. After entering a
value, the limit table is sorted to place
the frequency or time in the correct
order. For a new point,
defaults to 0 dBm and
defaults to
Previous Pt
then becomes active.
Key Access: ,
Display Limits
,
Limit 2 Edit
Amplitude
Allows you to enter the amplitude
value for the current limit point. After
entering a value,
Connected to Previous
becomes active. If a Tab key is
Pt
pressed without entering a value, the
current and
Amplitude
values of the point are
Previous Pt
selected. If Tab ⇑ is pressed, the point
number automatically increments to
allow entry of the amplitude of the next
point, or if a new point, to allow
to be entered for the new
Frequency
point.
Key Access: ,
Display Limits
,
Limit 2 Edit
Display
,
Enter
(or )
Time
, or
Limit 1
if
Time
Amplitude
Connected to
.
Yes Amplitude
, or
Limit 1
Connected to
, or
Limit 1
75