Set Center Frequency Step Size To The Marker Value - Agilent Technologies ESA Series User's/Programmer's Reference

not available in zero span.
Front Panel
Access:
Marker –>, Mkr –> Start

Set Center Frequency Step Size to the Marker Value

:CALCulate:MARKer[1]|2|3|4[:SET]:STEP
Sets the center frequency step size to match the marker frequency. In delta marker
mode, the center frequency step size will be set to the frequency difference
between the markers. Select the delta marker mode with
:CALCulate:MARKer[1]|2|3|4:MODE DELTa . This command is not
available if the delta marker is off, or in zero span.
Front Panel
Access:
Marker –>, Mkr –> CF Step
Peak Search (or Search), Meas Tools, Mkr –> CF
Set Stop Frequency to the Marker Value
:CALCulate:MARKer[1]|2|3|4[:SET]:STOP
Sets the stop frequency to the value of the active marker frequency. In delta marker
mode, the stop frequency is set to the marker delta value. This command is not
available in zero span.
Front Panel
Access: Marker –>, Mkr –> Stop
Marker On/Off
:CALCulate:MARKer[1]|2|3|4:STATe OFF|ON|0|1
:CALCulate:MARKer[1]|2|3|4:STATe?
Turns the selected marker on or off.
Front Panel
Access: Marker, Off
Marker Table On/Off
:CALCulate:MARKer:TABLe:STATe OFF|ON|0|1
:CALCulate:MARKer:TABLe:STATe?
Chapter 5
Remote Command Reference
CALCulate:MARKer Subsection
257