Frequency Counter Marker Automatic Resolution - Agilent Technologies ESA Series User's/Programmer's Reference

Front Panel
Access: Freq Count, Resolution Auto Man

Frequency Counter Marker Automatic Resolution

:CALCulate:MARKer:FCOunt:RESolution:AUTO OFF|ON|0|1
:CALCulate:MARKer:FCOunt:RESolution:AUTO?
Sets the resolution of the marker frequency counter so it is automatically coupled
to the frequency span, generating the fastest accurate count.
Factory Preset
and *RST: On
Front Panel
Access: Freq Count, Resolution Auto Man
Frequency Counter Marker
:CALCulate:MARKer[1]|2|3|4:FCOunt[:STATe] OFF|ON|0|1
:CALCulate:MARKer[1]|2|3|4:FCOunt[:STATe]?
Turns on or off the marker frequency counter. To query the frequency counter, use
:CALCulate:MARKer[1]:FCOunt:X? If the specified marker number is not
the active marker, it becomes the active marker. If the specified marker number is
not on, it is turned on and becomes the active marker. Once the marker count is on,
it is on for any active marker, not just for the one used in the command. A 1 is
returned only if marker count is on and the selected number is the active marker.
Factory Preset
and *RST: Off
Remarks: If a frequency count x value is generated when the frequency
count state is off, then 9e15 is returned.
Front Panel
Access:
Freq Count, Marker Count On Off
Frequency Counter Marker Query
:CALCulate:MARKer[1]|2|3|4:FCOunt:X?
Queries the marker frequency counter.
Remarks: If a frequency count x value is generated when the frequency
count state is off, then 9e15 is returned.
Chapter 5
Remote Command Reference
CALCulate:MARKer Subsection
251