Auto Couple - Agilent Technologies ESA Series User's/Programmer's Reference

Front-Panel Key Reference

Auto Couple

Auto Couple
Accesses the menus to couple functions in your analyzer. Coupled
functions are functions that are linked.
Auto-couples all coupled functions. If
Auto All
functions are set to
This function is not available when the segmented sweep function is set
NOTE
to On, (
Coupled functions are functions that are linked. If one function is
changed, the coupled function is changed. During normal operation, the
sweep time, resolution bandwidth, video bandwidth, and center
frequency step are coupled to span; the input attenuation is coupled to
the reference level.
If any of these functions become uncoupled (is set to manual), a # sign
appears next to the screen annotation representing the function on the
screen. If one or more functions are manually set so that the amplitude
or frequency becomes uncalibrated "Meas Uncal" appears on the top
right side of the graticule.
To recouple the analyzer functions, the uncoupled function(s) must be
individually set back to Auto. Or, you can press
the functions to their default auto state. Pressing
the following functions:
• Sweep time will couple to the span, detector mode, resolution
•
•
•
• RF attenuation couples to reference level.
• Center frequency step size will couple to 10% of span.
• Sweep coupling (SR/SA) will couple back to SA mode.
• Source attenuation couples to source amplitude.
• Source power step couples to one vertical scale division.
Key Access:
Although
NOTE
they are not affected by
54
.
Auto
).
Segmented (On)
bandwidth, and video bandwidth.
is set.
Detector (Auto)
is set.
Avg Type (Auto)
is set.
PHNoise Opt (Auto)
Auto Couple
,
Marker Count Gate Time
Auto All
is pressed all coupled
Auto All
Auto All
Auto All
, and have
Marker Trace
.
to return all of
will couple
settings,
Auto
Chapter 2