Marker Function - Agilent Technologies ESA Series User's/Programmer's Reference

Remote Command Reference
CALCulate:MARKer Subsection

Marker Function

:CALCulate:MARKer[1]|2|3|4:FUNCtion BPOWer|NOISe|OFF
:CALCulate:MARKer[1]|2|3|4:FUNCtion?
Selects the marker function for the specified marker. To query the value returned
by the function, use :CALCulate:MARKer[1]|2|3|4:Y?
Remarks:
Front Panel
Access:
Marker Peak (Maximum) Search
:CALCulate:MARKer[1]|2|3|4:MAXimum
Performs a peak search based on the search mode settings of
:CALCulate:MARKer:PEAK:SEARch:MODE .
NOTE See command :CALCulate:MARKer:PEAK:SEARch:MODE
Front Panel
Access:
Marker Peak (Maximum) Left Search
:CALCulate:MARKer[1]|2|3|4:MAXimum:LEFT
Places the selected marker on the next highest signal peak to the left of the current
marked peak.
Remarks:
Front Panel
Access:
252
BPOWer is the power integrated within the bandwidth
NOISe is a noise measurement
OFF turns off all functions
When a measurement under the front panel MEASURE key is
started, this command is turned off. If this command is turned
on when any of the MEASURE key measurements are in
progress, that measurement will be stopped.
Marker, Function
Peak Search (or Search), Meas Tools
The marker will be placed at the next highest peak that rises and
falls by at least the peak excursion above the peak threshold. If
no peak meets the excursion and threshold criteria, a No Peak
Found error (202) is given.
Peak Search (or Search), Next Pk Left
,
Peak Search
Chapter 5