Can Bus Interface (Option G20); Profinet Interface (Option G24); Modbus Plus Interface (Option G21); Modbus Rtu Slave Interface (Option G22) - Siemens SINAMICS MV 9LD4110-7EX70-1AA0 Operating Instructions Manual

This option contains the following equipment/features:
• Strengthened mechanical cabinet design
• Handrail below the operator panel
• Mechanical cabinet door locking
• Cabinet design in an IP44 degree of protection
• Anti-condensation heating
The drive can be welded to the ship's hull structure.
3.5.39

Can Bus interface (option G20)

The standard version of the drive is equipped with a PROFIBUS interface (slave). Communication
Boards CBC10 and CBE20 are used to link the drive to the CANopen bus system.
3.5.40

PROFINET interface (option G24)

The CBE20 communication module allows the drive to be networked using PROFINET.
Additional information about the communication module is provided in document
"Supplementary component descriptions
109768128)".
3.5.41

Modbus Plus interface (option G21)

Using the Anybus X-Gateway communication module, the converter can be connected to the
Modbus Plus third-party bus system.
3.5.42

Modbus RTU Slave interface (option G22)

Using the Anybus X-Gateway communication module, the converter can be connected to the
Modbus RTU third-party bus system.
3.5.43

DeviceNet interface (option G23)

Using the Anybus X-Gateway communication module, the converter can be connected to the
DeviceNet third-party bus system.
3rd Party LCI Control Upgrade
Operating Instructions, 02/2022, A5E31872818
(https://www.lda-portal.siemens.com/siemlda/en/
Description
3.5 Options
51