Show Igmp_Snooping Multicast_Vlan_Group; Show Igmp_Snooping Group - D-Link DGS-1100-16/ME Reference Manual

show igmp_snooping multicast_vlan_group

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show igmp snooping multicast VLAN group:
DGS-1100-24P/ME:admin#show igmp_snooping multicast_vlan_group
name test
Command : show igmp_snooping multicast_vlan_group name test
VID Vlan Name IP Range
----- ---------------- --------------------------------------------
8
DGS-1100-24P/ME:admin#

show igmp_snooping group

Purpose
Syntax
Description
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Member(Untagged) Ports : 10-12
Tagged Member Ports
Source Ports
Status
Replace Source IP
Total Entries: 1
DGS-1100-24P/ME:admin#
To show the current status of IGMP snooping multicast VLAN group
on the Switch.
show igmp_snooping multicast_vlan_group {name <vlan_name
8>}
The show igmp_snooping multicast_vlan_group command
displays the current IGMP snooping multicast VLAN group
configuration on the Switch.
name<vlan_name 8> − The name of the VLAN, IGMP snooping
configuration will be displayed on. Up to 8 characters can be used.
None.
test 225.0.0.1~ 226.0.0.1
To display the current IGMP snooping group configuration on the
Switch.
show igmp_snooping group [all | [vlan_name <vlan_name 8> |
vlanid <vidlist 1-4094> | ports <portlist>] {ipaddress<ipaddr>}]
The show igmp_snooping group command displays the current
IGMP snooping group configuration on the Switch.
The group table shared with MLD snooping. If MLD snooping and
IGMP snooping are enabled at the same time, the total that can be
learned by the dynamic group, will be limited by the number of MLD
snooping groups that exist (including static group and dynamic
:
:
: Disabled
: 0.0.0.0
99