Stop Auto-Scan Function; Auto-Scan Mode; Auto-Scan Time Interval; Console Lock - D-Link KVM-440 User Manual

8/16 port combo kvm switch

Hide thumbs Also See for KVM-440:

Table of Contents

6.6.2. Stop Auto-scan Function

Press any key on keyboard to STOP the auto-scan function. Alternatively

you may stop the auto-scan function by pressing the button on the front

panel of the KVM.

There are two auto-scan modes, please refer section 7.3.1 Setup in OSD –

Scan Mode to set up the auto-scan mode.

Scan all computers.

Scan any computers which are marked for auto-scan.

The auto-scan time interval can be adjusted by pressing <F1> from the

OSD main menu. Please refer section 7.3.1 Setup in OSD – Scan Time.

Note: You can also begin the auto-scan function by pressing <F2> from the

OSD main menu. Please refer section 7.4 Auto-Scan in OSD.

If security mode is enabled in OSD mode (by pressing <F5> in OSD mode), you

can lock the console by pressing <Scroll Lock> twice, and then <H> and

Figure 14: Auto-scan hotkey

Figure 15: Auto-scan Banner

Channel Name

Channel Number

Indicates Scan Mode

Table of Contents

Show Quick Links

Table of Contents

Kvm-450