Xerox WorkCentre 5790 Series Service Manual page 368

Y N
Go to Flag 2. Check MOT 11-000.
Refer to:
• 11G-110 2K LCSS PWB Damage RAP.
• GP 10, How to Check a Motor.
• P/J305, 2K LCSS PWB.
• 11D-110 2K LCSS Power Distribution RAP.
Repair or install new components as necessary:
• Transport motor 1, PL 11.14 Item
• 2K LCSS PWB, PL 11.26 Item
If the fault is still present, perform 11-007-110, 11-008-110, 11-312-110, 11-313-110, 11-319-
110 Rear Tamper Move Failure RAP.
NOTE: A software problem can cause the machine to incorrectly display the fault code 11-142-
110.
Transport motor 2
MOT11-001
Figure 1 Component location
Status Indicator RAPs
11-140-110, 11-142-110
2.
1.
2nd to top
exit sensor
Q11-140
Diverter gate
solenoid
S11-002
Transport motor 1
MOT 11-000
May 2013
2-336 Xerox® WorkCentre® 5790 Family