Table of Contents
Advertisement
Figure 3 Circuit diagram
Xerox® WorkCentre® 5790 Family
08-171 Unexpected Time Out RAP
08-171 The IOT detects an unexpected event for a known sheet. A sheet left in the machine
after jam clearance.
Initial Actions
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
GP
death or injury. Moving parts can cause injury.
•
Enter the machine status mode and check for the active messages. Refer to
Codes and Message RAP for the jam clearance procedure.
•
Check the condition of the paper in all trays, Refer to
•
Check for obstructions in the paper path.
•
Make sure that all covers and paper guides are closed, and latch correctly.
•
Check for paper in the output device.
Procedure
If the initial actions did not resolve the problem. Switch off the machine, then switch on the
machine,
GP
14. If a fault code is displayed then go to the appropriate RAP.
May 2013
2-251
WARNING
14. Disconnect the power cord. Electricity can cause
IQ1
and
GP
20.
Status Indicator RAPs
08-160B, 08-161B, 08-171
OF4
Status
Advertisement
Chapters
Table of Contents
