Xerox WorkCentre 5790 Series Service Manual page 384

D E
Y N
Repair the wiring.
Install a new power supply module,
Check for a short circuit or overload in the wiring or components connected to +5V on the
2K LCSS PWB. Refer to GP 7.
Perform the 11G-110 2K LCSS PWB Damage RAP, if necessary install a new 2K LCSS PWB,
PL 11.26 Item 1.
Figure 1 Component location
Status Indicator RAPs
11D-110
PL 11.26 Item 2.
Power Supply
Module
May 2013
2-352 Xerox® WorkCentre® 5790 Family