Xerox WorkCentre 5790 Series Service Manual page 379

B
Repair or install new components as necessary:
• SH 1 paper sensor, PL 11.12 Item
• 2K LCSS PWB, PL 11.26 Item 1.
Enter dC330, code 11-365, manually actuate the SU1 safety gate switch, S11-365. The
play changes.
Y N
Go to Flag 1. Check S11-365. Refer to:
• 11G-110 2K LCSS PWB Damage RAP.
• GP 13, How to Check a Switch.
• Figure 2.
• P/J311, 2K LCSS PWB.
• 11D-110 2K LCSS Power Distribution RAP.
Repair or install new components as necessary:
• Safety gate interlock switch, PL 11.8 Item
• 2K LCSS PWB, PL 11.26 Item 1.
Enter dC330, code 11-026 to run the paddle motor in reverse. The switch cam is rotated
counter clockwise to it's end stop.
Y N
Go to 11-024-110, 11-025-110 Paddle Roll Failure RAP.
If the stapler is still inoperative, install a new staple head unit,
Perform SCP 6 Final Actions.
Stapler
traverse
assembly
Ejector assembly
Figure 1 Component location
Xerox® WorkCentre® 5790 Family
2.
1.
PL 11.20 Item 5.
Edge registration
sensor Q11-367
Edge reg-
istration
sensor
LED
Offline staple LED
Offline staple switch S11-373
dis-
SH1 paper
sensor
Q11-361
Staple head
Offline staple PWB
Figure 2 Component location
May 2013
2-347
Safety gate switch
connector
Switch support
bracket
Spring
Switch cam
SU 1 safety gate
switch S11-365
Status Indicator RAPs
11A-110