Placing The Mpe720 Online; Preparing The Ethernet Connection - YASKAWA MP3000 Series Setup Manual

3.5 Placing the MPE720 Online

3.5.1 Preparing the Ethernet Connection

3.5

Placing the MPE720 Online

This section describes how to go online.
Term
3.5.1

Preparing the Ethernet Connection

Use the following procedure to prepare the Ethernet connection.
1.
Use an Ethernet cable to connect the Ethernet connector on the Machine Controller to
the LAN connector on the PC.
Note
On the PC, select Control Panel − Network Connection − Local Area Connection −
2.
Properties from the Windows Start Menu.
Double-click Internet Protocol (TCP/IP) in the list.
3.
3-14
Going online refers to connecting the MPE720 to the Machine Controller.
You can use either a cross or a straight Ethernet cable to connect the Machine Controller directly
to the PC.