YASKAWA MP3000 Series Setup Manual page 246

5.3 Monitoring Machine Operation
5.3.1 Axis Monitor
Names and Functions of the Axis Monitor Tab Page Items
The following figure shows the items that are displayed on the Axis Monitor Tab Page.
No.




Note
The following section gives detailed information on each item.
 Tool Bar
The toolbar contains icons for selecting the circuit, changing the monitoring speed, and con-
trolling the display.
5-36
Item
Tool Bar
Circuit and axis display
Axis operating status display
Monitor parameter display
The following axes can be displayed for the given Modules.
SVC or SVC32: The axes connected to the MECHATROLINK
SVC-01: The axes connected to the MECHATROLINK
SVB Module: The axes connected to the MECHATROLINK
SVA-01: 2 axes
SVR: 16 axes
PO-01: 4 axes
Icon
Circuit selection
Monitor type
Stop monitor
Start monitor
Alarm Monitor
Refresh
Use the toolbar to update the display or stop the monitor.
Displays the circuit number and the axis name.
Displays the operating status of the axis.
Displays the names and current values of the monitor parame-
ters.
Name
Selects the circuit to monitor.
Selects the monitoring frequency from the fol-
lowing three options:
• High-speed monitor
• Normal-speed monitor
• Low-speed monitor
Stop monitor: Stops the monitor.
Monitoring: The monitor is operating.
Display the Alarm Monitor.
Updates the information on the Axis Monitor Tab
Page.
Function
Function



