5.3 Monitoring Machine Operation
5.3.3 Realtime Tracing
Split Graph Displays
You can group the trace data by data type and assign a separate graph for each group, creat-
ing a split display.
The trace data consist of the group that is on the Trace Target List Tab Page, and the group of
other registers.
You can switch between the split display and the combined display.
Changing the Graph Unit
If the trace data has more than one unit, you can change the unit for the vertical axis of the
graph.
When you do that, the scale of the vertical axis will change according to the axis information
(unit and decimal digits), and the waveforms will be displayed accordingly.
Note
No Unit:
5-54
1. The available units depend on the axis information.
2. The axis unit can be changed regardless of the graph display method. It works for the split dis-
play as well as for the combined display. When you change the unit, the color of the trace lines
that have a different unit will be dimmed.
Millimeters (mm):