Replacing And Adding Optional Modules - YASKAWA MP3000 Series Setup Manual

2.1 MP3200 Installation

2.1.5 Replacing and Adding Optional Modules

2.1.5

Replacing and Adding Optional Modules

Use the following procedure to replace or add Optional Modules.
Important
1.
Turn OFF the power supply and disconnect all cables from the MP3000.
2.
Remove the tool from Base Unit.
3.
Insert the protruding part of the tool into the slot on top of the Optional Module panel to
unhook the tab.
Information
Unhook the bottom tab in the same way.
2-12
Always create a backup before replacing or adding Optional Modules.
Back up the program from the MP3000-series Controller to the PC using the MPE720.
Use the same method to remove the Option Cover from an unused slot before adding an
Optional Module.