YASKAWA MP3000 Series Setup Manual page 261

 Starting and Stopping Traces
Function
Use this button to start the trace. The data that is sampled will be displayed in real-
time.
Start Trace
If the Program Option was selected in the Sampling & Trigger Setting Dialog Box, the
trace cannot be started manually. You can use only the Read Again Button.
Select the Real Time Display Check Box to display the trace data moving in realtime.
Real Time Display If more than one Trace Tab Page is open, you can use a realtime display for only one of
them.
Use this button to stop the trace. When you press the Stop Button, all trace buffer
Stop Trace
data will be collected and displayed.
 Read Again
The Read Again Button re-reads the trace data from the Machine Controller.
5.3 Monitoring Machine Operation
5.3.3 Realtime Tracing
Description
5
5-51