YASKAWA MP3000 Series Setup Manual page 216

5.1 Debugging Ladder Programs
5.1.2 Register List Panes
 Register Map Refresh Button ( )
Click this button to refresh the values in the register map.
Note
 Redundant Register Search Button ( / )
This button searches for and displays redundant registers. The
dant registers upward, and the
The results will be displayed on the register map. If a redundant register was found, it will be
displayed with a blue background.
Note
Editing Data
You can perform the following editing operations by selecting cells on the register map.
• Directly entering data
• Deleting data (setting the data to 0)
• Copying and pasting data
If the Machine Controller is online, any changes in the data immediately affect the operation of
the Machine Controller.
5-6
This button is disabled when the Register Map Show/Hide Button is in Hide (
[↓]
This button is disabled when the Register Map Show/Hide Button is in Hide (
Button searches downward.
) status.
[↑]
Button searches for redun-
) status.