YASKAWA MP3000 Series Setup Manual page 110

3.6 Device-specific Settings
3.6.2 Detailed Module Settings
3.
Double-click the motion parameter to set or monitor.
The Axis Display Selection Dialog Box ("Display in axis selected") will be displayed.
Select the axis to set or monitor, and then click the OK Button.
4.
The SVC Definition Tab Page for the selected motion parameters will be displayed.
Information
 Setting the Fixed Parameters
The values of the fixed parameters depend on the Servomotor that is controlled by the Control-
ler, and also on the machine that is driven by the Servomotor. These settings cannot be
changed from a ladder program.
The actual values to set will depend on the Servomotor and the machine.
3-32
To change which motion parameters are displayed, double-click the required motion
parameters in the Work Space Pane.