YASKAWA MP3000 Series Setup Manual page 46

2.1 MP3200 Installation
2.1.6 Battery Installation and Replacement
Battery Replacement
 Suitable battery replacement must be performed and it must be performed only by an
 Replace the Battery only while power is supplied to the MP3200.
 Do not touch the electrodes when replacing the Battery.
 Observe all local laws and ordinances when you dispose of used Batteries.
 When Using the CPU-201
1.
Back up the programs and data stored in the MP3200.
Note: The backup can be used to recover the data if the data accidentally gets deleted during Battery replace-
2.
Confirm that the RDY indicator on the CPU Unit is lit.
3.
Open the battery holder on the bottom of the CPU Unit.
2-18
experienced technician.
There is a risk of electrical shock, injury, or device damage.
Replacing the Battery while the power supply to the MP3200 is turned OFF may result in
loss of the data stored in memory in the MP3200.
Static electricity may damage the electrodes.
ment. Refer to the following section for details on backing up the data.
4.5 Transferring Data with the MPE720 on page 4-65
CAUTION
Lit.
Lit.
Battery holder