Searching And Replacing In Project Files; Viewing A Motion Subprogram; Cross Reference Searches - YASKAWA MP3000 Series Setup Manual

5.2.6

Searching and Replacing in Project Files

You can search and replace text in the same way as you can for ladder programs. Refer to the
following section for details.
5.1 Debugging Ladder Programs
5.2.7

Viewing a Motion Subprogram

You can open and view a program that is called with an MSEE instruction.
1.
Select the MSEE instruction for the drawing with the program to view, then select
Debug − Refer from the menu bar.
2.
The called program will be displayed in the Edit Tab Page.
5.2.8

Cross Reference Searches

You can search and replace text in the same way as you can for ladder programs. Refer to the
following section for details.
5.1 Debugging Ladder Programs
5.2 Debugging a Motion or a Sequence Program
−
Searching and Replacing in Project Files (page 5-12)
−
Cross Reference Panes (page 5-14)

5.2.6 Searching and Replacing in Project Files

5
5-27