Connecting An Exioif Module - YASKAWA MP3000 Series Setup Manual

2.2 MP3300 Installation

2.2.6 Connecting an EXIOIF Module

5.
Securely connect the lead connector of the replacement Battery to the connector in the
Base Unit, and insert the replacement Battery into the battery holder.
6.
Confirm that the BAT indicator of the CPU Module is not lit.
7.
Close the cover. This completes Battery replacement.
2.2.6

Connecting an EXIOIF Module

You can mount an EXIOIF Module to the MP3000-series Base Unit to connect up to four
Expansion Racks. Refer to the following section for details.
2.1.8 EXIOIF Module Connections on page 2-24
2-36
CN U55
LK1
LK2
M-III