Checking For Multiple Coils - YASKAWA MP3000 Series Setup Manual

5.1.7

Checking for Multiple Coils

You can check for multiple coils (different coils that use the same register) in the entire ladder
program, and display the search results.
When you use a project link connection, the data in the project file is used. Sometimes the dis-
played results do not match the data in the linked Machine Controller.
When you check for multiple coils and use a project link connection, first always read the data to
Note
the project file from the Controller.
Select Debug − Check for Multiple Coils from the menu bar.
Searching for multiple coils will start, and the results will be displayed in the Check for Multiple
Coils Pane.
If the Enable to Multiple Coil Check Check Box is selected in the compile options, a search for
multiple coils will be performed during compilation and the results will be displayed as warnings in
the Output Pane.
Note
5.1 Debugging Ladder Programs

5.1.7 Checking for Multiple Coils

Multiple coils are displayed.
5
5-17