Block Number
This column displays the numbers of the blocks where the alarms occurred.
Double-click the block number to jump to the program where the alarms occurred.
The block numbers are displayed in the Motion Editor Tab Page.
Block number
Alarm Contents
This box displays a description of the alarm.
Corrective Action
This box displays instructions to correct the error that caused the alarm to occur.
S Registers
Refer to the following manual for information on checking the alarm codes in the S registers.
MP3000 Series MP3200/MP3300 Troubleshooting Manual (Manual No.: SIEP C880725 01)
5.2 Debugging a Motion or a Sequence Program
5.2.9 Alarm Monitor
5
5-31