2.3 Connecting Devices
2.3.5 USB Connector Connection
2.3.5
USB Connector Connection
This section describes how to connect a USB memory device to the USB connector on an
MP3000-series Machine Controller.
Connecting a USB Memory Device to the USB Connector
This section describes how to insert and remove a USB memory device.
Inserting a USB Memory Device
1.
Open the USB connector cover.
2.
Insert the USB memory device into the USB connector.
Confirm that the USB ACTIVE indicator lights.
Refer to the following manual for details on the USB status indicator.
2-48
MP3000 Series MP3200 User's Manual (Manual No.: SIEP C880725 10)
MP3000 Series MP3300 User's Manual (Manual No.: SIEP C880725 21)
Open the cover.
USB connector